SAR Test Laboratory and Equipment

SAR Test Laboratory and Equipment

Welcome to test the RF exposure of your products at Verkotan's top notch SAR test laboratory!

Our SAR test experts have years of experience of testing complex radio devices including mobile phones, tablets, military radios, antenna base stations, trackers and different kind of IoT devices!

Our SAR test laboratory is located in Oulu, Finland. You can get here easily by air plane (labs are located 20 minutes from closest airport) or just send your products for testing and let our test experts take care of them. 

Below you can see some of our SAR test equipment.

To get more detailed picture of our test services or to request a quote for SAR testing, click here >

2 x SPEAG's DASY5 SAR Test System

We are using DASY5 SAR test systems located in an RF shielded rooms. 

SAR Test Laboratory Capabilities:
  • Head, body and whole body capability
  • Measurable frequency range: 30-6000MHz
  • SAR testing in non-signaling and signaling modes
  • Dielectric parameter validation
DASY5 SAR test system for CE and FCC SAR testing

3 x SPEAG's TWIN SAM Phantom

Compliance testing of wireless devices in hand-held configurations according to IEC 62209-1, IEEE 1528, etc.

Dimensions:

Length: 1000mm

Width: 500mm

Height: adjustable feet

TWIN SAM phantom for head and body SAR testing

BSTP-A - Base Station Phantom Adult

We have recently invested into 1.8 meter long Base Station Phantom, which is meant for SAR evaluations in accordance with the Base-Station Antenna Testing standards (e.g. IEC 62232). This phantom (BSTP-A) is for adult exposure assessments.

Dimensions:

Length: 1540 mm
Width:    339 mm

Base Station Phantom for whole body SAR testing

3 x SPEAG's ELI Phantom

Flat phantom for compliance testing of handheld and body-mounted wireless devices in the frequency range of 30 MHz to 6 GHz. 

Dimensions:

Major axis: 600mm

Miner axis: 400mm

ELI phantom for SAR testing

3 x SPEAG's Modular Flat Phantom (MFP)

The Modular Flat Phantom consists of three identical modules that can be installed and removed separately without emptying the liquid. It is used for compliance testing of small wireless devices in body-worn configurations according to IEC 62209-2, etc.

Flat phantom for SAR testing
Example SAR result measured at Verkotan's SAR test laboratory