OTA Test Services
OTA 2G, 3G, 4G and 5G Testing
OTA WLAN Testing
OTA Bluetooth and BLE TRP & TIS testing
OTA GNSS Testing
For all bands and common radio systems
(GSM, UMTS, LTE, LTE-M, NB-IoT, etc.)
OTA testing measures the radiated RF performance of a device. It is one of the most challenging product design areas in wireless devices. We can quickly locate the problems so you can make the necessary design changes for the best possible RF performance. High-accuracy OTA testing during the product development phase helps you to avoid very expensive product modification costs at the final phase of the product development.
We can help you to understand the OTA requirements for PTCRB and all operator requirements around the world.
With our extensive experience in OTA testing, we are capable of providing OTA testing services efficiently and faster than other commercially used systems. Our in-depth knowledge helps you to find solutions for degraded performance due to interference, call drops, high power consumption.
We can test e.g. the following products
- Information technology products
- Electrical products
- Communication Products
Our test capabilities cover testing of wide range of radio systems. TRP (total radiated power) and TIS (total isotropic sensitivity) can be measured according to the industry standards. Our state-of-the-art laboratories support testing up to 5G. Here is a list of the radio systems supported in our laboratories. We provide testing according to the 3GPP and ETSI standards including RED conformance testing.
- 5G Bands
- GSM Bands
- UMTS Bands
- LTE Bands
- LTE CAT NB1
- LTE CAT M1
- CDMA bands
- TD-SCDMA Bands
- GPS
- Passive Antenna Testing
- Glonass
- Beidou
- FM Radio
- Wlan
- Bluetooth
MIMO OTA Testing
- We offer MIMO OTA pre-conformance measurements.
- MIMO OTA Testing measures the changes in data throughput and the signal strength of the device when it is moved further from the closest base station. High accuracy MIMO OTA Measurements during the product R&D phase helps you to avoid very expensive product modification costs at the final phase of the product development.
Advanced MIMO OTA Testing for R&D
- We provide MIMO OTA measurements for devices that support 4×2 MIMO and 4×4 MIMO.
Fast MIMO OTA 2×2 Testing for Pre-conformance MIMO Testing
- Fast MIMO OTA is a replacement for CTIA MIMO OTA, and is extremely efficient for pre-conformance MIMO measurements. The test cases provide similar results to the official CTIA MIMO OTA testing but testing itself is 5 to 10 times faster.
Verkotan has one accredited high-quality OTA and antenna test chamber for SISO and MIMO test purposes.
We can provide support in creating new testing procedures and in applying standardized procedures prescribed by National and International specifications.
SISO/MIMO Chamber
This lab can be used for 3GPP & SISO and pre-conformance MIMO Measurements. In this chamber, we are able to create a radio environment according to the client’s needs and test the device in a repeatable and reliable way. The chamber is also utilized for 5G test system solutions development and can be used for GNSS, WLAN, and IoT testing.
- Diameter: 6.0m
- Height: 5.8m
- Measurement Distance 2.2m
Measurement Antennas:
- 11 pcs. SISO – 16 pcs. MIMO
Frequency Range:
- 600MHz – 6GHz
Want to know more?
We are happy to hear your needs and see how we can help you with them.
Uncategorized
Fatih Bayramoglu- Test system engineer at Verkotan
Again, it is time to introduce you one of our employees. Today, our test system engineer Fatih will tell you about himself, his responsibilities and the work atmosphere at Verkotan. By reading this article you also find out what is it that test system engineer does on his free time. Read more
Antenni
Antenna measurement data visualization tool now available from Verkotan!
We at Verkotan are always seeking improvement and continuously developing our services to fit our customer needs. Our core competence is wireless testing, and we know how tricky comparing and visualizing multiple antenna measurement results can sometimes be. That is why we are extremely excited to tell you about our new data visualization tool: AntView. Read more
Uncategorized
Verkotan has extended the scope – Accredited Test Laboratory 3GPP TS 37.145-2
We got it! Verkotan has extended the scope from the Accredited Test Laboratory TS 38.141-2 to cover 3GPP TS 37.145-2. New testing area covers Active Antenna System (AAS) Base Station (BS) conformance testing 3GPP TS 37.145-2 Section 6.2 covers EIRP - Effective Isotropic Radiated Power measurements and section 7.2 covers Open The Air - OTA sensitivity measurements. Read more
Uncategorized
Meet Mikko Mattila, Wireless Performance Test Engineer
It is time to introduce you to our team member, Mikko Mattila. Mikko has been part of the Verkotan team for a year now and he is eager to share his thoughts about working at Verkotan. He will also share light on what does a wireless performance test engineer’s job entail. Read more